Struct nix::mount::MsFlags

pub struct MsFlags { /* fields hidden */ }

Implementations

impl MsFlags
const MS_RDONLY: Self = _

Mount read-only

const MS_NOSUID: Self = _

Ignore suid and sgid bits

const MS_NODEV: Self = _

Disallow access to device special files

const MS_NOEXEC: Self = _

Disallow program execution

const MS_SYNCHRONOUS: Self = _

Writes are synced at once

const MS_REMOUNT: Self = _

Alter flags of a mounted FS

const MS_MANDLOCK: Self = _

Allow mandatory locks on a FS

const MS_DIRSYNC: Self = _

Directory modifications are synchronous

const MS_NOATIME: Self = _

Do not update access times

const MS_NODIRATIME: Self = _

Do not update directory access times

const MS_BIND: Self = _

Linux 2.4.0 - Bind directory at different place

const MS_MOVE: Self = _
const MS_REC: Self = _
const MS_SILENT: Self = _
const MS_POSIXACL: Self = _
const MS_UNBINDABLE: Self = _
const MS_PRIVATE: Self = _
const MS_SLAVE: Self = _
const MS_SHARED: Self = _
const MS_RELATIME: Self = _
const MS_KERNMOUNT: Self = _
const MS_I_VERSION: Self = _
const MS_STRICTATIME: Self = _
const MS_LAZYTIME: Self = _
const MS_ACTIVE: Self = _
const MS_NOUSER: Self = _
const MS_RMT_MASK: Self = _
const MS_MGC_VAL: Self = _
const MS_MGC_MSK: Self = _
pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&Self) -> c_ulong

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: c_ulong) -> $crate::_core::option::Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: c_ulong) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: c_ulong) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&Self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&Self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&Self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&Self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut Self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut Self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut Self, other: Self)

Toggles the specified flags in-place.

pub fn set(
    &mut Self,
    other: Self,
    value: bool
)

Inserts or removes the specified flags depending on the passed value.

#[must_use]
pub const fn intersection(Self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

#[must_use]
pub const fn union(Self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

#[must_use]
pub const fn difference(Self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

#[must_use]
pub const fn symmetric_difference(Self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

#[must_use]
pub const fn complement(Self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl BitAnd<MsFlags> for MsFlags
type Output = MsFlags
fn bitand(Self, other: Self) -> Self

Returns the intersection between the two sets of flags.

impl BitAndAssign<MsFlags> for MsFlags
fn bitand_assign(&mut Self, other: Self)

Disables all flags disabled in the set.

impl BitOr<MsFlags> for MsFlags
type Output = MsFlags
fn bitor(Self, other: MsFlags) -> Self

Returns the union of the two sets of flags.

impl BitOrAssign<MsFlags> for MsFlags
fn bitor_assign(&mut Self, other: Self)

Adds the set of flags.

impl BitXor<MsFlags> for MsFlags
type Output = MsFlags
fn bitxor(Self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

impl BitXorAssign<MsFlags> for MsFlags
fn bitxor_assign(&mut Self, other: Self)

Toggles the set of flags.

impl Clone for MsFlags
fn clone(&Self) -> MsFlags
impl Copy for MsFlags
impl Debug for MsFlags
impl Eq for MsFlags
impl Extend<MsFlags> for MsFlags
fn extend<T: $crate::_core::iter::IntoIterator<Item = Self>>(&mut Self, iterator: T)
impl FromIterator<MsFlags> for MsFlags
fn from_iter<T: $crate::_core::iter::IntoIterator<Item = Self>>(iterator: T) -> Self
impl Hash for MsFlags
fn hash<__H: $crate::hash::Hasher>(&Self, state: &mut __H) -> ()
impl Not for MsFlags
type Output = MsFlags
fn not(Self) -> Self

Returns the complement of this set of flags.

impl Octal for MsFlags
impl Ord for MsFlags
fn cmp(&Self, other: &MsFlags) -> $crate::cmp::Ordering
impl PartialEq<MsFlags> for MsFlags
fn eq(&Self, other: &MsFlags) -> bool
fn ne(&Self, other: &MsFlags) -> bool
impl StructuralEq for MsFlags
impl Sub<MsFlags> for MsFlags
type Output = MsFlags
fn sub(Self, other: Self) -> Self

Returns the set difference of the two sets of flags.

impl SubAssign<MsFlags> for MsFlags
fn sub_assign(&mut Self, other: Self)

Disables all flags enabled in the set.

Auto Trait Implementations

impl Send for MsFlags
impl Sync for MsFlags
impl Unpin for MsFlags
impl UnwindSafe for MsFlags

Blanket Implementations

impl<T> Any for T
where
    T: 'static + ?Sized,
fn type_id(&Self) -> TypeId
impl<T> Borrow<T> for T
where
    T: ?Sized,
fn borrow(&Self) -> &T
impl<T> BorrowMut<T> for T
where
    T: ?Sized,
fn borrow_mut(&mut Self) -> &mut T
impl<T> From<T> for T
fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into<U> for T
where
    U: From<T>,
fn into(Self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> ToOwned for T
where
    T: Clone,
type Owned = T
fn to_owned(&Self) -> T
fn clone_into(&Self, target: &mut T)
impl<T, U> TryFrom<U> for T
where
    U: Into<T>,
type Error = Infallible
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
impl<T, U> TryInto<U> for T
where
    U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
fn try_into(Self) -> Result<U, <U as TryFrom<T>>::Error>